MXIK (IKPU) codes, class 07216: Angles, shapes and sections of iron or non-alloy steel
1 position · 12 subpositions · 1,670 codes · tasnif.soliq.uz, data as of 14.10.2026
Updated:
Class 07216 "Angles, shapes and sections of iron or non-alloy steel" accounts for 1,670 codes in group 072 "Iron and steel". They are spread across 1 position and 12 subpositions. That is 33% of all codes in the group.
All subpositions of the class sit in a single position, 07216001 "Angles, shapes and sections of iron or non-alloy steel". The largest subpositions are "Galvanised steel profile" (07216001006, 1,070), "I-beam" (07216001004, 221), "Steel profiled sheeting" (07216001001, 161). 2 of the 12 subpositions hold exactly one code. Other examples: "Angle profiles", "Perforated angle", "Cladding profile", "Hot-rolled profile".
By number of codes the class ranks 1st of 28 in the group. Neighbouring classes: 07215 "Other bars and rods of iron or non-alloy steel, other than of…" (1 code) and 07217 "Wire of iron or non-alloy steel" (562 codes). Under the coding scheme in the Regulation on the National Catalogue, digits 2 to 5 of a goods code are the customs (TN VED, HS-based) code; for this class it is 7216.
Codes in this class
| Code | Name | Copy code |
|---|---|---|
| 07216001 | Angles, shapes and sections of iron or non-alloy steel1,670 codes | |
| 07216001001 | Steel profiled sheeting161 codes | |
| 07216001002 | Angle profiles66 codes | |
| 07216001004 | I-beam221 codes | |
| 07216001005 | Metal roof tile strip2 codes | |
| 07216001006 | Galvanised steel profile1,070 codes | |
| 07216001007 | Perforated angle20 codes | |
| 07216001010 | Steel channel74 codes | |
| 07216001013 | Cladding profile1 code | |
| 07216001014 | Reinforcing profile1 code | |
| 07216001015 | Hot-rolled profile15 codes | |
| 07216001017 | Shaped products36 codes | |
| 07216001018 | Galvanised sheet air ducts3 codes |
How to apply an MXIK code
- Find the subposition of your good or service: the first 11 digits are the group, class, position and subposition.
- Pick the 17-digit code on tasnif.soliq.uz: the last 6 digits are brand and attribute; goods without a barcode use "000000".
- Show this code in electronic invoices (ESF) and online cash register receipts, and for imports in the customs cargo declaration.
- Watch for changes on tasnif.soliq.uz: deleting or changing a code takes effect after 30 days.
- No suitable code? Send a request to the operator through your personal account (reviewed within 3 working days).
Help with MXIK codes in accounting and e-invoices
Leader Audit accountants can match MXIK codes to your product list, review invoices and receipts and set up your accounting in line with the code rules.
Accounting servicesOther classes in this group
- 07202 — Ferro-alloys
- 07207 — Semi-finished products of iron or non-alloy steel
- 07208 — Flat-rolled products of iron or non-alloy steel, 600 mm or more wide, hot-rolled, not clad, plated or coated
- 07209 — Flat-rolled products of iron or non-alloy steel, 600 mm or more wide, cold-rolled, not clad, plated or coated
- 07210 — Flat-rolled products of iron or non-alloy steel, clad, plated or coated
- 07212 — Flat-rolled products of iron or non-alloy steel, less than 600 mm wide, clad, plated or coated
- 07213 — Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils
- 07214 — Bars and rods of iron or non-alloy steel
- 07217 — Wire of iron or non-alloy steel
- 07222 — Bars and rods of stainless steel; angles, shapes and sections of stainless steel
- 07225 — Flat-rolled products of other alloy steel, 600 mm or more wide
- 07226 — Flat-rolled products of other alloy steel, less than 600 mm wide
- 07228 — Other bars and rods of other alloy steel; angles, shapes and sections of other alloy steel; hollow drill bars and rods of alloy or non-alloy steel
Frequently asked questions
What is the MXIK (IKPU) code for "Galvanised steel profile"?
The subposition "Galvanised steel profile" has code 07216001006: group 072, class 07216, position 07216001 "Angles, shapes and sections of iron or non-alloy steel". It covers 1,070 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.
What is the MXIK (IKPU) code for "Perforated angle"?
The subposition "Perforated angle" has code 07216001007: group 072, class 07216, position 07216001 "Angles, shapes and sections of iron or non-alloy steel". It covers 20 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.
How many MXIK codes are in class 07216?
As of 14.10.2026, class 07216 "Angles, shapes and sections of iron or non-alloy steel" has 1 position, 12 subpositions and 1,670 codes. Every code in the class starts with 07216.
How does class 07216 differ from class 07217?
They are neighbouring classes of group 072. Class 07216 "Angles, shapes and sections of iron or non-alloy steel" has 1 position and 1,670 codes; class 07217 "Wire of iron or non-alloy steel" has 1 position and 562 codes. The class is digits 4–5 of the MXIK code, so a wrong class changes the base code of the item.
Where must the MXIK code be shown?
Under the Regulation on the National Catalogue (Cabinet of Ministers Resolution No. 263 of 28 April 2025) the catalogue is used for electronic invoices, online cash register receipts and the customs cargo declaration (except goods imported for the first time). A code that does not match the base code (first 11 digits) can lead to a fine of 1% of the value under Article 223(5) of the Tax Code.
Sources
Book a meeting with a Leader Audit partner
Your first consultation is free. Get an expert assessment of your business risks.