MXIK (IKPU) codes, group 072: Iron and steel
28 classes · 65 subpositions · 5,115 codes · tasnif.soliq.uz, data as of 14.10.2026
Updated:
Group 072 "Iron and steel" brings together 28 classes, 32 positions and 65 subpositions: 5,115 codes in total, or 1.1% of the MXIK (IKPU) classifier. By number of codes it ranks 16th of 117 groups.
The largest classes by number of codes are 07216 "Angles, shapes and sections of iron or non-alloy steel" (1,670, 33%), 07214 "Bars and rods of iron or non-alloy steel" (1,165, 23%), 07208 "Flat-rolled products of iron or non-alloy steel, 600 mm or more…" (644, 13%). Its largest subposition is "Galvanised steel profile" (07216001006, 1,070 codes). 14 classes have their own pages; the other 14 are shown in full in the table below.
The most compact classes are 07223 "Wire of stainless steel" (1 code) and 07229 "Wire of other alloy steel" (1 code). The group code is the first three digits of an MXIK; under the scheme in the Regulation on the National Catalogue, digits 2 to 5 of a goods code match the customs (TN VED, HS-based) code.
Classes in this group
| Code | Name | Copy code |
|---|---|---|
| 07201 | Pig iron and spiegeleisen in pigs, blocks or other primary forms9 codes | |
| 07201001001 | Pig iron and spiegeleisen in pigs, blocks or other primary forms9 codes | |
| 07202 | Ferro-alloys6 codes | |
| 07203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms1 code | |
| 07203001001 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products1 code | |
| 07204 | Ferrous waste and scrap; remelting scrap ingots of iron or steel3 codes | |
| 07204001002 | Ferrous waste and scrap1 code | |
| 07204001005 | Other ferrous waste and scrap1 code | |
| 07204001006 | Remelting scrap ingots1 code | |
| 07205 | Granules and powders of pig iron, spiegeleisen, iron or steel2 codes | |
| 07205001001 | Granules of pig iron, spiegeleisen, iron or steel1 code | |
| 07205001002 | Powders of pig iron, spiegeleisen, iron or steel1 code | |
| 07206 | Iron and non-alloy steel in ingots or other primary forms1 code | |
| 07206001001 | Iron and non-alloy steel in ingots or other primary forms1 code | |
| 07207 | Semi-finished products of iron or non-alloy steel8 codes | |
| 07208 | Flat-rolled products of iron or non-alloy steel, 600 mm or more wide, hot-rolled, not clad, plated or coated644 codes | |
| 07209 | Flat-rolled products of iron or non-alloy steel, 600 mm or more wide, cold-rolled, not clad, plated or coated39 codes | |
| 07210 | Flat-rolled products of iron or non-alloy steel, clad, plated or coated95 codes | |
| 07211 | Flat-rolled products of iron or non-alloy steel, less than 600 mm wide, not clad, plated or coated17 codes | |
| 07211001001 | Flat-rolled products of iron or non-alloy steel, less than 600 mm wide, not clad, plated or coated16 codes | |
| 07211001002 | Perforated sheet1 code | |
| 07212 | Flat-rolled products of iron or non-alloy steel, less than 600 mm wide, clad, plated or coated382 codes | |
| 07213 | Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils56 codes | |
| 07214 | Bars and rods of iron or non-alloy steel1,165 codes | |
| 07215 | Other bars and rods of iron or non-alloy steel, other than of headings 7213 and 72141 code | |
| 07215001001 | Other bars and rods of iron or non-alloy steel, other than of headings 7213 and 72141 code | |
| 07216 | Angles, shapes and sections of iron or non-alloy steel1,670 codes | |
| 07217 | Wire of iron or non-alloy steel562 codes | |
| 07219 | Flat-rolled products of stainless steel, 600 mm or more wide13 codes | |
| 07219001001 | Flat-rolled products of stainless steel13 codes | |
| 07220 | Flat-rolled products of stainless steel, less than 600 mm wide5 codes | |
| 07220001001 | Flat-rolled products of stainless steel, less than 600 mm wide5 codes | |
| 07221 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils1 code | |
| 07221001001 | Hot-rolled bars and rods of stainless steel, in coils1 code | |
| 07222 | Bars and rods of stainless steel; angles, shapes and sections of stainless steel113 codes | |
| 07223 | Wire of stainless steel1 code | |
| 07223001001 | Wire of stainless steel1 code | |
| 07224 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel2 codes | |
| 07224001001 | Gear blank1 code | |
| 07224001002 | Semi-finished products of other alloy steels1 code | |
| 07225 | Flat-rolled products of other alloy steel, 600 mm or more wide23 codes | |
| 07226 | Flat-rolled products of other alloy steel, less than 600 mm wide155 codes | |
| 07227 | Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils3 codes | |
| 07227200001 | Hot-rolled bars and rods of silico-manganese steel, in coils3 codes | |
| 07228 | Other bars and rods of other alloy steel; angles, shapes and sections of other alloy steel; hollow drill bars and rods of alloy or non-alloy steel137 codes | |
| 07229 | Wire of other alloy steel1 code | |
| 07229001001 | Wire of other alloy steel1 code |
How to apply an MXIK code
- Find the subposition of your good or service: the first 11 digits are the group, class, position and subposition.
- Pick the 17-digit code on tasnif.soliq.uz: the last 6 digits are brand and attribute; goods without a barcode use "000000".
- Show this code in electronic invoices (ESF) and online cash register receipts, and for imports in the customs cargo declaration.
- Watch for changes on tasnif.soliq.uz: deleting or changing a code takes effect after 30 days.
- No suitable code? Send a request to the operator through your personal account (reviewed within 3 working days).
Help with MXIK codes in accounting and e-invoices
Leader Audit accountants can match MXIK codes to your product list, review invoices and receipts and set up your accounting in line with the code rules.
Accounting servicesFrequently asked questions
Which classes make up group 072?
Group 072 "Iron and steel" contains 28 classes: 07201 "Pig iron and spiegeleisen in pigs, blocks or other primary…", 07202 "Ferro-alloys", 07203 "Ferrous products obtained by direct reduction of iron ore…", 07204 "Ferrous waste and scrap; remelting scrap ingots of iron or…", 07205 "Granules and powders of pig iron, spiegeleisen, iron or…", 07206 "Iron and non-alloy steel in ingots or other primary forms", 07207 "Semi-finished products of iron or non-alloy steel", 07208 "Flat-rolled products of iron or non-alloy steel, 600 mm or…" and 20 more.
What is the MXIK (IKPU) code for "Galvanised steel profile"?
The subposition "Galvanised steel profile" has code 07216001006: group 072, class 07216, position 07216001 "Angles, shapes and sections of iron or non-alloy steel". It covers 1,070 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.
What is the MXIK (IKPU) code for "Calibrated rolled bars"?
The subposition "Calibrated rolled bars" has code 07214001006: group 072, class 07214, position 07214001 "Bars and rods of iron or non-alloy steel". It covers 755 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.
How many MXIK codes are in group 072?
As of 14.10.2026, group 072 "Iron and steel" has 5,115 codes in 65 subpositions. All of them start with 072.
What if there is no suitable MXIK code?
According to the official tasnif.soliq.uz FAQ, codes are searched by subposition name, brand, barcode or the first 4 digits of the customs (TN VED) code, via the site questionnaire or in the Excel export of the database. If nothing fits, a request is sent to the catalogue operator through the personal account; it is reviewed within 3 working days.
Sources
Book a meeting with a Leader Audit partner
Your first consultation is free. Get an expert assessment of your business risks.