MXIK (IKPU) codes, class 07407: Copper bars, rods and profiles
1 position · 3 subpositions · 220 codes · tasnif.soliq.uz, data as of 14.10.2026
Updated:
Class 07407 "Copper bars, rods and profiles" accounts for 220 codes in group 074 "Copper and articles thereof". They are spread across 1 position and 3 subpositions. That is 14% of all codes in the group.
All subpositions of the class sit in a single position, 07407001 "Copper bars, rods and profiles". The largest subpositions are "Copper bars" (07407001004, 114), "Brass bars" (07407001003, 104), "Copper bars, rods and profiles" (07407001001, 2).
By number of codes the class ranks 4th of 16 in the group. Neighbouring classes: 07406 "Copper powders and flakes" (2 codes) and 07408 "Copper wire" (198 codes). Under the coding scheme in the Regulation on the National Catalogue, digits 2 to 5 of a goods code are the customs (TN VED, HS-based) code; for this class it is 7407.
Codes in this class
| Code | Name | Copy code |
|---|---|---|
| 07407001 | Copper bars, rods and profiles220 codes | |
| 07407001001 | Copper bars, rods and profiles2 codes | |
| 07407001003 | Brass bars104 codes | |
| 07407001004 | Copper bars114 codes |
How to apply an MXIK code
- Find the subposition of your good or service: the first 11 digits are the group, class, position and subposition.
- Pick the 17-digit code on tasnif.soliq.uz: the last 6 digits are brand and attribute; goods without a barcode use "000000".
- Show this code in electronic invoices (ESF) and online cash register receipts, and for imports in the customs cargo declaration.
- Watch for changes on tasnif.soliq.uz: deleting or changing a code takes effect after 30 days.
- No suitable code? Send a request to the operator through your personal account (reviewed within 3 working days).
Help with MXIK codes in accounting and e-invoices
Leader Audit accountants can match MXIK codes to your product list, review invoices and receipts and set up your accounting in line with the code rules.
Accounting servicesOther classes in this group
- 07403 — Refined copper and copper alloys, unwrought
- 07408 — Copper wire
- 07409 — Copper plates, sheets and strip, of a thickness exceeding 0.15 mm
- 07411 — Copper tubes and pipes
- 07412 — Copper tube or pipe fittings (couplings, elbows, flanges)
- 07413 — Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated
- 07415 — Nails, tacks, drawing pins, staples and similar articles of copper or of iron or steel with copper heads
- 07418 — Table, kitchen or other household articles and parts thereof, of copper
- 07419 — Other articles of copper
Frequently asked questions
What is the MXIK (IKPU) code for "Copper bars"?
The subposition "Copper bars" has code 07407001004: group 074, class 07407, position 07407001 "Copper bars, rods and profiles". It covers 114 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.
What is the MXIK (IKPU) code for "Copper bars, rods and profiles"?
The subposition "Copper bars, rods and profiles" has code 07407001001: group 074, class 07407, position 07407001 "Copper bars, rods and profiles". It covers 2 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.
How many MXIK codes are in class 07407?
As of 14.10.2026, class 07407 "Copper bars, rods and profiles" has 1 position, 3 subpositions and 220 codes. Every code in the class starts with 07407.
How does class 07407 differ from class 07408?
They are neighbouring classes of group 074. Class 07407 "Copper bars, rods and profiles" has 1 position and 220 codes; class 07408 "Copper wire" has 2 positions and 198 codes. The class is digits 4–5 of the MXIK code, so a wrong class changes the base code of the item.
What if there is no suitable MXIK code?
According to the official tasnif.soliq.uz FAQ, codes are searched by subposition name, brand, barcode or the first 4 digits of the customs (TN VED) code, via the site questionnaire or in the Excel export of the database. If nothing fits, a request is sent to the catalogue operator through the personal account; it is reviewed within 3 working days.
Sources
Book a meeting with a Leader Audit partner
Your first consultation is free. Get an expert assessment of your business risks.