MXIK (IKPU) codes, group 025: Salt, sulphur, plastering materials, lime and cement

    29 classes · 82 subpositions · 2,089 codes · tasnif.soliq.uz, data as of 14.10.2026

    Updated:

    Group 025 "Salt, sulphur, plastering materials, lime and cement" brings together 29 classes, 39 positions and 82 subpositions: 2,089 codes in total, or 0.47% of the MXIK (IKPU) classifier. By number of codes it ranks 27th of 117 groups.

    The largest classes by number of codes are 02517 "Pebbles, gravel, broken or crushed stone; granules, chippings and…" (767, 37%), 02501 "Salt and pure sodium chloride; sea water and saline solutions" (485, 23%), 02523 "Portland cement, aluminous cement and other cements, whether or not…" (389, 19%). Its largest subposition is "Crushed stone (including crushed stone-sand mix)" (02517001004, 562 codes). 8 classes have their own pages; the other 21 are shown in full in the table below.

    The most compact classes are 02514 "Slate" (1 code) and 02525 "Mica; mica waste" (1 code). The group code is the first three digits of an MXIK; under the scheme in the Regulation on the National Catalogue, digits 2 to 5 of a goods code match the customs (TN VED, HS-based) code.

    Classes in this group

    CodeNameCopy code
    02501Salt and pure sodium chloride; sea water and saline solutions485 codes
    02502Unroasted iron pyrites1 code
    02502001001Unroasted iron pyrites1 code
    02503Sulphur of all kinds, other than sublimed, precipitated and colloidal sulphur1 code
    02503001001Sulphur of all kinds, other than sublimed, precipitated and colloidal sulphur1 code
    02504Natural graphite1 code
    02504001001Natural graphite1 code
    02505Natural sands of all kinds, other than metal-bearing sands of group 026238 codes
    02506Quartz (other than natural sands); quartzite3 codes
    02506001001Quartz1 code
    02506001003Quartzite1 code
    02506001004Sauna stove stones1 code
    02507Kaolin and other kaolinic clays4 codes
    02507001001Kaolin3 codes
    02507001002Other kaolinic clays1 code
    02508Other clays (excluding expanded clays of heading 6806), andalusite, kyanite and sillimanite, mullite; chamotte or dinas earths51 codes
    02509Chalk3 codes
    02509001001Chalk3 codes
    02510Natural calcium phosphates, natural aluminium calcium phosphates and phosphatic chalk2 codes
    02510002001Natural calcium phosphates, natural aluminium calcium phosphates and phosphatic chalk, unground1 code
    02510002002Natural calcium phosphates, natural aluminium calcium phosphates and phosphatic chalk, ground1 code
    02511Natural barium sulphate (barytes); natural barium carbonate (witherite), other than barium oxide of class 28164 codes
    02511001001Natural barium sulphate (barytes)3 codes
    02511001002Natural barium carbonate (witherite)1 code
    02512Siliceous fossil meals (kieselguhr)4 codes
    02512001002Kieselguhr1 code
    02512001003Diatomite2 codes
    02512001004Other siliceous fossil meals1 code
    02513Pumice stone and other natural abrasives3 codes
    02513001001Pumice stone1 code
    02513001002Other natural abrasives1 code
    02513001003Sand for sandblasting machines1 code
    02514Slate1 code
    02514001001Slate1 code
    02515Marble, travertine, ecaussine and other calcareous stone; alabaster4 codes
    02515001002Marble, crude or roughly split or sawn1 code
    02515001003Travertine, crude or roughly split or sawn1 code
    02515001004Calcareous tuff, crude or roughly split or sawn1 code
    02515004001Ecaussine and alabaster1 code
    02516Granite, porphyry, basalt, sandstone and other monumental or building stone, crude or roughly split, whether or not sawn25 codes
    02517Pebbles, gravel, broken or crushed stone; granules, chippings and powder of stones of class 2515 or 2516767 codes
    02518Dolomite2 codes
    02518001001Dolomite2 codes
    02519Natural magnesium carbonate (magnesite) and other magnesium oxides4 codes
    02519004001Other magnesium oxides1 code
    02519001002Magnesium oxide, pure grade1 code
    02519001003Gunning mix (shotcrete mass)1 code
    02519001004Caustic magnesite powder1 code
    02520Gypsum, anhydrite and gypsum plasters47 codes
    02521Limestone; limestone flour9 codes
    02521001001Limestone7 codes
    02521001002Limestone flour2 codes
    02522Quicklime, slaked lime and hydraulic lime25 codes
    02523Portland cement, aluminous cement and other cements, whether or not in the form of clinkers389 codes
    02524Asbestos3 codes
    02524001001Asbestos3 codes
    02525Mica; mica waste1 code
    02525001001Mica; mica waste1 code
    02526Natural steatite and talc4 codes
    02526001001Natural steatite1 code
    02526001002Talc3 codes
    02528Natural borates and concentrates thereof; natural boric acid2 codes
    02528001001Natural borates and concentrates thereof1 code
    02528001002Natural boric acid1 code
    02529Feldspar, fluorspar, leucite, nepheline and nepheline syenite2 codes
    02529001001Feldspar or fluorspar1 code
    02529001002Leucite, nepheline and nepheline syenite1 code
    02530Mineral substances not elsewhere specified or included4 codes
    02530999002Vermiculite concentrate1 code
    02530999003Red ochre (burnt brown mineral pigment)1 code
    02530999004Other mineral substances (not listed in other subpositions)2 codes

    How to apply an MXIK code

    • Find the subposition of your good or service: the first 11 digits are the group, class, position and subposition.
    • Pick the 17-digit code on tasnif.soliq.uz: the last 6 digits are brand and attribute; goods without a barcode use "000000".
    • Show this code in electronic invoices (ESF) and online cash register receipts, and for imports in the customs cargo declaration.
    • Watch for changes on tasnif.soliq.uz: deleting or changing a code takes effect after 30 days.
    • No suitable code? Send a request to the operator through your personal account (reviewed within 3 working days).

    Help with MXIK codes in accounting and e-invoices

    Leader Audit accountants can match MXIK codes to your product list, review invoices and receipts and set up your accounting in line with the code rules.

    Accounting services

    Frequently asked questions

    Which classes make up group 025?

    Group 025 "Salt, sulphur, plastering materials, lime and cement" contains 29 classes: 02501 "Salt and pure sodium chloride; sea water and saline…", 02502 "Unroasted iron pyrites", 02503 "Sulphur of all kinds, other than sublimed, precipitated…", 02504 "Natural graphite", 02505 "Natural sands of all kinds, other than metal-bearing sands…", 02506 "Quartz (other than natural sands); quartzite", 02507 "Kaolin and other kaolinic clays", 02508 "Other clays (excluding expanded clays of heading 6806)…" and 21 more.

    What is the MXIK (IKPU) code for "Crushed stone (including crushed stone-sand mix)"?

    The subposition "Crushed stone (including crushed stone-sand mix)" has code 02517001004: group 025, class 02517, position 02517001 "Pebbles, gravel, broken or crushed stone". It covers 562 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.

    What is the MXIK (IKPU) code for "Edible salt"?

    The subposition "Edible salt" has code 02501001007: group 025, class 02501, position 02501001 "Salt". It covers 396 codes: all of them start with these 11 digits, and the last 6 digits stand for brand and attribute. The exact 17-digit code is chosen on tasnif.soliq.uz.

    How many MXIK codes are in group 025?

    As of 14.10.2026, group 025 "Salt, sulphur, plastering materials, lime and cement" has 2,089 codes in 82 subpositions. All of them start with 025.

    Where must the MXIK code be shown?

    Under the Regulation on the National Catalogue (Cabinet of Ministers Resolution No. 263 of 28 April 2025) the catalogue is used for electronic invoices, online cash register receipts and the customs cargo declaration (except goods imported for the first time). A code that does not match the base code (first 11 digits) can lead to a fine of 1% of the value under Article 223(5) of the Tax Code.

    Book a meeting with a Leader Audit partner

    Your first consultation is free. Get an expert assessment of your business risks.

    Full confidentiality at the first call stage
    Response within 24 hours
    No obligations
    +998

    By clicking the button, you agree to the privacy policy